CRYO CURE CANNABIS MACHINE MODELS

Dry Cannabis in as Little as 11 Hours

Cryo Cure’s patented technologies and methodologies eliminate the human error that can occur during the cannabis curing and drying process. The machines are pre-programmed for the optimal moisture content while preserving the terpene and cannabinoid-rich trichomes. Use the built-in touchscreen to easily choose your settings, and use the WiFi or ethernet connection to export and log data. No matter the settings chosen, Cryo Cured cannabis results in pristine trichome preservation and unparalleled flavor and scent.

Explore our Cryo Cure models below.

HIGH-CAPACITY MODELS (HC4, HC7, AND HC10)

The newly redesigned high-capacity machines from Cryo Cure feature an easy load-in, load-out system. This new design utilizes trays and rolling racks with 35 shelves per rack, which can be rolled from your walk-in freezer directly into the Cryo Cure machine. These racks are highly efficient and intelligently built, with narrow trays to minimize drying imbalance, embedded temperature sensors, and multiple independent control zones (number varies depending on model).

Read More:

Our high-capacity models are designed with features that help speed up processing time without affecting product quality. Upgraded refrigeration capacity contributes to overall faster processing time, while quick condenser defrosting helps ready the machines for a new batch quickly. The programming interface can be monitored remotely on your phone or tablet, while the easy to operate touch screen controls display precisely what’s going on at each stage of the patented Cryo Cure process. These machines are also designed with the ability to load and unload product while the machine is processing another batch. The result is improved efficiency and a lightning-fast return on your investment.

Models:

We offer three high-capacity models: HC4, HC7, and HC10.

  • The HC4 holds four roll-in racks and accommodates approximately 400 pounds of material (wet weigh-in)
  • The HC7 holds seven roll-in racks and accommodates approximately 700 pounds of material (wet weigh-in)
  • The HC10 holds 10 roll-in racks and accommodates approximately 1,050 pounds of material (wet weigh-in)
Capacity:
  • 35 shelves per rack, with 2” spacing in between each shelf
  • Shelves can be removed to make more room between layers 140 trays (HC4), 245 trays (HC7), or 350 trays (HC10) total
  • Holds approximately 400 (HC4), 700 (HC7), or 1,050 (HC10) pounds (wet weight-in)
Features:
  • Comes in three sizes: HC4, HC7, and HC10
  • Shorter cycle times supported by refrigeration capacity
  • Includes proprietary recipes for smokable flower, extraction, and terpene harvesting
  • Easy-to-sterilize racks embedded with zoned temperature monitoring system
Specifications:

HC4 Specifications:

  • Product carts: 4
  • Total trays: 140
  • Vacuum system: Leybold model SP630
  • Refrigeration: Fluid Chiller Inc. 80,000 BTU/hr
  • Temperature: -40℃
  • Condenser surface area: 176 square feet
  • Product capacity: 1,500 pounds
  • Temperature control zones: 12
  • Temperature sensors: 24
  • Removable shelves: 47
  • Heater power: 230V/120A
  • Vacuum and mechanical: 460V/45A
  • Chiller: 460V/60A
  • Construction: Stainless
  • Compressed air: CDA 60/10
  • Chiller fluid: DynaLene HC-FG
  • Controls: Opto-22 GROOV-EPIC PLC
  • Approximate chamber weight: 8,500 pounds
  • Chamber footprint: 8 feet by 9 feet
  • Outdoor chiller footprint: 8 feet by 8 feet
  • Vacuum pump footprint: 3 feet by 4 feet

HC7 Specifications:

  • Product carts: 7
  • Total trays: 245
  • Vacuum system: Leybold model SP630/1001
  • Refrigeration: Fluid Chiller Inc. 140,000 BTU/hr
  • Temperature: -40℃
  • Condenser surface area: 380 square feet
  • Product capacity: 2,200 pounds
  • Temperature control zones: 21
  • Temperature sensors: 42
  • Removable shelves: 47
  • Heater power: 230V/210A
  • Vacuum and mechanical: 460V/55A
  • Chiller: 460V/80A
  • Construction: Stainless
  • Compressed air: CDA 60/10
  • Chiller fluid: DynaLene HC-FG
  • Controls: Opto-22 GROOV-EPIC PLC
  • Approximate chamber weight: 15,000 pounds
  • Chamber footprint: 8 feet by 15 feet
  • Outdoor chiller footprint: 8 feet by 16 feet
  • Vacuum pump footprint: 3 feet by 4 feet

HC10 Specifications:

  • Product carts: 10
  • Total trays: 350
  • Vacuum system: Leybold model SP630/1001
  • Refrigeration: Fluid Chiller Inc. 200,000 BTU/hr
  • Temperature: -40℃
  • Condenser surface area: 440 square feet
  • Product capacity: 3,500 pounds
  • Temperature control zones: 30
  • Temperature sensors: 60
  • Removable shelves: 47
  • Heater power: 230V/300A
  • Vacuum and mechanical: 460V/60A
  • Chiller: 460V/100A
  • Construction: Stainless
  • Compressed air: CDA 60/10
  • Chiller fluid: DynaLene HC-FG
  • Controls: Opto-22 GROOV-EPIC PLC
  • Approximate chamber weight: 20,000 pounds
  • Chamber footprint: 8 feet by 21 feet
  • Outdoor chiller footprint: 8 feet by 20 feet
  • Vacuum pump footprint: 3 feet by 4 feet

NOW ACCEPTING ORDERS FOR THE CC260

The newest machine in the Cryo Cure lineup fits up to 20 pounds (wet weight in) of cannabis, the perfect size for craft growers and small batches. Dry and cure your cannabis in as little as 11 hours! The CC260 takes up a smaller footprint, too, clocking in at 4 feet tall and less than 3 feet wide. They’re also stackable to maximize space savings.

The CC260 model costs $49,900 + freight. Please contact Cryo Cure for current delivery times.

Features:
  • 12 to 15 hour cycle time, depending upon product density and selected setting
  • Smaller footprint than other Cryo Cure models
  • Six built-in drawers
  • Drawer size: Approx. 33.4” by 13.7”
  • Comes equipped with three proprietary and patented Cryo Cure recipes
  • Customize your settings through built-in controls
Capacity:
  • Up to 20 pounds wet weigh-in per cycle
Specifications:
  • Power requirements: 16A/400V
  • Measurements: 48” by 29” by 37” (122cm x 73cm x 94cm)

Walk in freezers

10’ x 10’ x 10’

How it's built:

This freezer features 4” wall and ceiling panels. Each NSF-certified panel is constructed with insulation, 0.040” aluminum, and ¾-inch plywood reinforcement. The ceiling panels are LAG-down, manufactured with U.L. Listed, Class 1, Non-CFC foamed-in-place polyurethane with tongue-and-groove foam rails. The floors are not pallet jack rated. The ceiling panels are rated at 40 lbs.

Freezer Finish:

Interior & Exterior: 26-gauge Stucco-embossed galvalume steel

Walk-In Freezer Specifications:
  • 48” x 78” freezer door with heated frame
  • Air vent (115v)
  • Safety release
  • Cam-rise spring hinge
  • Hydraulic door closer
  • Kason Light Switch with Digital Therm #1967-3
  • 4’ LED light, shipped loose, bulb included
  • Wall trim, silicone, caulking, screws
Refrigeration Specifications:
  • 95°F outdoor ambient
  • 85°F air filtration
  • Remote refrigeration selection is based on normal holding temperature of -20°F for freezer
  • Additional product load, location, and usage can affect refrigeration equipment selection
  • Russell outdoor air-cooled remote condensing unit
  • Liquid line dryer / sight glass assembly
  • Defrost timer
Optional Features:

All optional features are an extra fee. Inquire with a Cryo Cure representative for details.

  • 4-year extended compressor warranty
  • Interior ramp
  • Kason 1967-4 temperature alarm
  • 54” wide door — add 6” to standard 48” door width
  • 14”x14” view window

20’ x 20’ x 10’

How it's Built:

This freezer features 5” wall and ceiling panels with an insulated floor. Each NSF-certified panel is constructed with insulation, 0.040” aluminum, and ¾-inch plywood reinforcement. The ceiling panels are LAG-down, manufactured with U.L. Listed, Class 1, Non-CFC foamed-in-place polyurethane insulation with tongue-and-groove foam rails. The floors are not pallet jack rated. The ceiling panels are rated at 40 lbs.

Freezer Finish:

Interior & Exterior: 26-gauge Stucco-embossed galvalume steel

Walk-In Freezer Specifications:
  • 48” x 78” freezer door with heated frame
  • Air vent (115v)
  • Safety release
  • Cam-rise spring hinge
  • Hydraulic door closer
  • Kason Light Switch with Digital Therm #1967-3
  • 4’ LED light, shipped loose, bulb included
  • Wall trim, silicone, caulking, screws
Refrigeration Specifications:
  • 95°F outdoor ambient
  • 85°F air filtration
  • Remote refrigeration selection is based on normal holding temperature of -20°F for freezer
  • Additional product load, location, and usage can affect refrigeration equipment selection
  • Russell outdoor air-cooled remote condensing unit
  • Liquid line dryer / sight glass assembly
  • Defrost timer
Optional Features:

All optional features are an extra fee. Inquire with a Cryo Cure representative for details.

  • 4-year extended compressor warranty
  • Interior ramp
  • Kason 1967-4 temperature alarm
  • Interior/exterior aluminum diamond kickplates

High Capacity CC Pilot

The CC Pilot offers the perfect introduction to the capabilities of Cryo Cure’s high capacity machines in a compact, efficient package. Processing up to 30 wet pounds of cannabis per 12 to 16 hour cycle, this machine offers the same great features as Cryo Cure’s HC models scaled down to a 3’ x 3’ chamber footprint with an internal chiller and vacuum pump. Complete with nine trays, the CC Pilot gives you everything you need to start freeze drying fresh cannabis at scale, even if you’re not ready to commit to a high capacity machine just yet.

Features:
  • 12 to 16 hour cycles
  • Leybold ND65 Dry Screw Vacuum Pump
  • Engineered Cold Chiller ‐40°C to 20°C (Package System)
  • High Vacuum rated valves (roughing, fore line, vent,)
  • Opto22 Groov PLC Controller
  • Opto22 Open‐Source Programming
  • Full Safety Interlocks to maintain employee safety
  • User‐programmable vacuum cycles
  • 96 User programmable unique recipes
  • Operation via network or wireless device
  • Data Logging of all parameters with User Input Batch ID
  • Password level protection for operator access
  • Native VPN client accessible
  • Web based Groov View interface
  • Node‐Red Open‐Source programming available for custom programming
Capacity:
  • Up to 30 pounds wet weigh-in per cycle
Specifications:
  • Measurements: 3’ x 3’

HAVE QUESTIONS ABOUT WHAT CRYO CURE CAN DO?

Explore our frequently asked questions.